LLC "Fergana Oil Refinery" offers service assistance for preparing mass and volumetric flow meters, as well as cold water meters, for verification and submission for verification.

Services 19 April 2024 Hits: 3114

Attention to enterprise and organization managers!

LLC "Fergana Oil Refinery" offers third-party organizations the following service works:

Preparation for metrological verification of various types of mass and volumetric flow meters (Coriolis, vortex, ultrasonic), such as:

Emerson – Micromotion CMF, Elite
Endress+Hauser – ProMass, Prosonic, Prowirl
Krohne – Optimass, Optisonic
Yokogawa – Yewflo, Rotamass
Rheonik – RHM
and similar devices.

Preparation for metrological verification of cold water meters.

Preliminary testing and preparation for the verification of the mentioned measuring instruments are conducted on the only certified high-precision reference verification installation “Pruver” in the Republic of Uzbekistan, using the volumetric method:

- Relative error of the first-grade verification unit is ±0.03%, with a flow capacity range from 0.8 to 800 m³/h, test medium is technical KEROSENE, Ø (25–300) mm;

- Error of the second-grade verification unit is ±0.1%, with a flow capacity range from 48 to 1000 m³/h, test medium is technical KEROSENE, Ø (25–300) mm;

- Unit for verification of cold water meters, error Δ±0.5%, flow capacity range from 0.03 to 150 m³/h, test medium is WATER, Ø (15–150) mm.

The services are provided by highly qualified specialists of LLC "Fergana Oil Refinery".

Prices and service timelines are calculated according to the price list approved by LLC "Fergana Oil Refinery" in accordance with a mutually signed bilateral agreement.

Price List for Service Preparation for Metrological Verification

Service Description	Unit	Wholesale Price (excl. VAT), UZS	VAT 12%, UZS	Wholesale Price (incl. VAT), UZS
Preparation and verification of flow meters	1 unit	5 199 190,97	623 902,92	5 823 093,89
Preparation and verification of cold water meters	1 unit	719 981,75	86 397,81	806 379,56

Calibration work is carried out on the territory of LLC "Fergana Oil Refinery" by representatives of the territorial administration of the State Institution "National Institute of Metrology of Uzbekistan" (SI "UzNIM") under the Agency for Technical Regulation of the Republic of Uzbekistan. Service costs are calculated according to the price list approved by SI "UzNIM" and are paid by the customer.

NOTE: Service support is provided from February to December (during periods when ambient temperature exceeds 5ºC to meet metrological requirements).

For additional information, please contact:

(73) 229-47-60 — Ildar Nazimovich Almenov, Head of ACS Operation Section, Workshop No. 12, email: This email address is being protected from spambots. You need JavaScript enabled to view it.
(73) 229-45-46 — Gulchehra Sultanbaevna Ismailova, Senior Engineer, Chief Metrologist Service, email: This email address is being protected from spambots. You need JavaScript enabled to view it. or This email address is being protected from spambots. You need JavaScript enabled to view it.